Keeping you up to date with Argon's latest noise

Case Study: Shrewsbury April 2026

Wed, 22 Apr 2026 13:56:55 GMT

Services: Gas

Client: Veolia

Location: Shrewsbury

We successfully delivered a new 63mm medium-pressure (MP) gas service to supply a U160 gas meter housed within a GC6 kiosk, overcoming a range of technical and logistical challenges.

The point of connection (POC) was located approximately 150 metres from the site, requiring open-cut excavation across an industrial roadway, followed by trenching along the verge and into the client’s premises.

The project was further complicated by legal and access constraints, including securing permissions for road crossings, managing easement agreements, and coordinating works across land owned by a third party.

Through careful planning, stakeholder engagement, and strict adherence to regulatory requirements, we were able to complete the installation safely and efficiently, delivering a reliable medium-pressure gas supply while minimising disruption to the surrounding area.

Case Study: Hans Place

Wed, 08 Apr 2026 09:23:51 GMT

Services: Gas, Water & Electric

Client: TSL Refurbishment Limited

Location: London

This project involved the installation of three utilities: a 63mm gas main, 63mm water main, and dual electric supplies (95mm and 185mm).

The gas and water works were completed using standard installation methods with no significant challenges. In contrast, the electrical installation was more complex. Prior to works commencing, UK Power Networks (UKPN) undertook reinforcement works to enable the new connection.

The project was located in an affluent and high-footfall area of London. Due to the busy footpath and restricted working space, the team carried out approximately 43 metres of hand digging to safely install the ducting while minimising disruption.

A further challenge involved installing the low-voltage (LV) cable along a constrained route into a below-ground basement, requiring careful planning and precision.

Despite these complexities, the project was delivered on time and to a high standard.

Case Study: Cranwood House

Wed, 18 Feb 2026 13:15:47 GMT

Services: New Electric TBS/Mains and Services

Client: Formation Design & Build

Location: Muswell Hill, London

For this project in North London, Argon installed a 300mm 3c waveform cable from the point of connection to a 600amp heavy duty cut-out situated in an external GRP for a temporary building supply (TBS) to give site temporary power whilst there were building works underway, UKPN carried out the energisation. The TBS was then converted to a permanent supply after we installed the full site mains and services, and the TBS was pot ended and removed. UKPD were the adopting independent distribution network owner.

Case Study: Shrewsbury

Wed, 11 Feb 2026 08:12:06 GMT

Services: New MP Gas Main, Service, Meter and Outlet

Client: Veolia

Location: Shrewsbury

For this project on behalf of Veolia in Shrewsbury, Argon was appointed to deliver new gas infrastructure for a commercial property, including installation of a new MP gas main, service connection, meter, and outlet pipework.

To begin, Argon connected to the existing MDPE MP gas main and installed approximately 140 metres of new MP main, with full CP and AE attendance. All public-side excavation and reinstatement along Vanguard Way were completed by Argon, while excavation on private roads was carried out by others.

Argon then installed 5 metres of new MDPE Medium pressure gas service from the new main to an external GRP kiosk, which Argon supplied and installed.

For metering, Argon supplied, installed, and commissioned a new medium pressure Smart Gas Meter with Chatterbox, configured for 100 mbar outlet pressure and 1291 kW/h load.

Finally, Argon installed approximately 70 metres of low pressure outlet pipework from the meter to the internal termination point, with all excavation and reinstatement undertaken by others. All works were fully tested and prepared for commissioning. This project delivered a complete, compliant, and ready-for-use gas infrastructure solution for the client.

Case Study: Valor Park

Wed, 28 Jan 2026 14:43:30 GMT

Services: New Gas & Water Services

Client: Glencar

Location: London

Argon delivered new utility infrastructure for a commercial development, completing all public-side excavation, connections, and commissioning while private-land works were carried out by others.

For gas, two new MDPE low-pressure services were installed, each terminating in colour-coded GRP kiosks with fire valves and ECVs. Argon supplied and installed the kiosks, and all works were tested and certified.

For water, one 63mm and one 32mm barrier pipe service were installed internally, each fitted with DCVs and stopcocks, including chlorination and testing. The works were coordinated with statutory approvals, traffic management, road closures, and parking suspensions, delivering fully compliant and operational utility services.

Case Study: Ellesmere Port

Wed, 28 Jan 2026 14:30:40 GMT

Services: Fire Hydrant

Client: MBA Consultants

Location: Ellesmere Port

Argon was appointed to install a new fire hydrant protection main within a private development for B&M Retail at Ellesmere Port.

The scope included laying approximately 308 metres of 125mm barrier pipe to form the new fire hydrant main, and installing a new fire hydrant.

All works were carried out within private land, requiring close coordination with the client to manage access and site conditions. After installation, Argon completed full commissioning, including pressure testing and verification, ensuring the hydrant system was fully compliant and ready for operational use.

This work provided the development with a reliable and certified fire protection asset, enhancing overall site safety.

If you have similar project requirements and would like to organise a site visit and quote, get in touch with our friendly team anytime.

Case Study: Former Honda Site

Wed, 14 Jan 2026 15:06:40 GMT

Services: Gas Mains & Services

Client: Matrix

Location: Swindon

Argon was successfully awarded a commercial development to install the new Medium Pressure (MP) gas network supplying ten commercial units within a private development. Argon connected to the existing MP main and installed 2,568m of new MP gas main in line with the client’s approved design, completing excavation and reinstatement within 1 metre of the connection point.

Argon then installed 10 Medium pressure gas services, each fitted with a Fire Valve and ECV, and supplied 2 bespoke kiosks, 7 GRP kiosks and 1 Uni Box. Ten concrete plinths were constructed to support the kiosks. All works were fully tested and certified, delivering a safe and compliant gas infrastructure system ready for commercial use.

Case Study: Boxing Academy

Tue, 30 Dec 2025 14:21:34 GMT

Services: Electric & Water Services

Client: McLaren Group

Location: London

Water Infrastructure

Argon have been commissioned to install a new 63mm barrier pipe water supply from the client’s plant room, terminating at a boundary meter and box . Due to the public main being a critical feeder main to thousands of dwellings, the Argon team will work closely with Thames Water to carry out the mains connection.

Prior to the completion of the service connection onto the parent main, the service will be fully commissioned and tested providing a safe and compliant water connection for the new development.

Electrical Infrastructure

Argon have started to install x2 300mm Triplex cables approximately 360m from the Point of Connection and will terminate on site into an 800kva Transformer, further updates on our progress will follow in due course.

We will be working closely with TFL and Hackney Council to help minimise disruption for the public and maintain safe working practices following NJUG guidelines at all times. Argon will be commissioning the Transformer, completing all testing and UKPN will be completing the closing joint.

Case Study: Lydden Road

Thu, 18 Dec 2025 15:18:07 GMT

Services: Removal of Gas Mains & Electric Civils

Client: VIQR London

Location: London

Argon was commissioned to remove a redundant gas main located within a public footpath. The works involved excavating approximately 90 metres, breaking out and disposing of the existing pipe.

The scope also included the excavation of two joint pits to facilitate UKPN operations, along with the exposure of five electrical ducts, which were subsequently relocated into the void created by the removed gas main. Upon completion, the footpath was fully backfilled and reinstated, and the site was handed back to the client with all works completed.

Giles Lane Block E

Thu, 18 Dec 2025 14:37:01 GMT

Services: New Electric Service

Client: WW Martin

Location: Canterbury

Argon installed a 300 mm 3-core waveform cable from the Point of Connection (POC) to the internal termination point, a 600 amp HDCO located in the plant room. The project was for a university accommodation development in the heart of Canterbury.

The council initially requested a full road closure; however, following on-site meetings with the council, the works were successfully completed under traffic light control, minimising disruption to local residents. UKPN carried out the energisation, and UKPD acted as the adopting IDNO.

Bedfordshire Chamber of Commerce

Thu, 27 Nov 2025 08:58:48 GMT

Bedfordshire Chamber of Commerce Membership

We’re really pleased to share that Argon Utility Infrastructure has officially joined the Bedfordshire Chamber of Commerce .

This is an exciting step for us as we continue to build our presence within the local business community and connect with organisations that share our commitment to driving the region forward.

The Bedfordshire Chamber of Commerce is well known for the work it does to support and champion businesses of all sizes. With a strong network of more than 800 members, the Chamber brings together companies from across the county and creates opportunities for them to collaborate, grow, and learn from one another. Whether it’s through networking events, training, or simply providing practical advice, the Chamber plays a key role in helping local businesses thrive.

What really stands out about the Chamber is its focus on giving businesses a voice. It works closely with regional and national bodies to make sure members are represented on the issues that matter, something that’s becoming increasingly important in an ever-changing business landscape. Knowing that we’re now part of this larger conversation is something we really value.

For us at Argon, joining the Chamber isn’t just about membership; it’s about becoming part of a community. We’re looking forward to getting to know other members, sharing our experience within the utility infrastructure sector, and learning from the many innovative businesses that make up the network. It’s also a great opportunity for us to highlight the importance of reliable, transparent, and straightforward utility solutions in supporting wider development across the region.

We’re genuinely excited about this next step and the opportunities it will bring. We look forward to getting involved, building new relationships, and contributing to the ongoing success of the Bedfordshire business community.

Ashley Road Block B & C

Thu, 20 Nov 2025 16:08:09 GMT

Services: Electric

Client: Formation Design & Build

Location: London

For the Ashley Road Block B & C development, Argon Utility Infrastructure delivered the full installation of a 300mm triplex high-voltage cable route, supplying two new substations serving the scheme.

Our team installed the Leg 1 cable into both Substation B and Substation C, managing all civil and electrical elements required to bring the network up to DNO standards.

Once our installation was complete, UK Power Networks carried out the closing joint, making the final authorised connection into their live network. This collaborative approach ensured a safe, compliant and efficient energisation process.

The project showcases our ability to deliver high-voltage infrastructure to tight programme requirements while coordinating seamlessly with the DNO to achieve a smooth and successful network connection.

Award Nomination

Thu, 20 Nov 2025 15:20:02 GMT

Blue Bricks Awards 2026 Nomination

We’re excited to share that Argon Utility Infrastructure has been nominated for Service Provider of the Year at the Blue Bricks Magazine Property Awards 2026. It’s a great honour to be recognised alongside so many respected businesses within the property sector, and it means a lot to our team.

The awards take place on 21st May 2026 at the Titanic Hotel in Liverpool, where guests from across the industry will come together for an evening of networking, celebration and recognition. Blue Bricks Magazine is known for spotlighting excellence within property and development, so being shortlisted really highlights the hard work our team puts in every day.

At Argon Utility Infrastructure, we focus on delivering reliable, transparent, and straightforward utility infrastructure solutions for our clients - and this nomination reflects the effort that goes into maintaining those standards. We’re grateful to our customers and partners for their continued trust and support, and to our team for consistently going above and beyond.

Whether we take home the award or not, we’re genuinely pleased to be included in this year’s shortlist and proud to stand alongside other strong nominees. We’re looking forward to the event and will be sure to share more updates as the awards night gets closer!

NERS Accreditation Update

Thu, 13 Nov 2025 09:43:31 GMT

NERS Accreditation Update

At Argon Utility Infrastructure, our commitment to delivering safe, compliant, and high-quality work is reflected in our accreditation under the National Electricity Registration Scheme (NERS).

As a nationally recognised framework operated by LRQA, NERS ensures that only competent and technically proficient contractors are approved to work on the UK’s electricity networks. Our recently issued certifications affirm our capability to carry out specialist works up to 20kV and highlight the strength of our internal management systems, training standards, and operational processes.

The first certificate covers construction, civil engineering and cable-laying activities, confirming our authority to manage and deliver infrastructure works such as excavation, reinstatement and the installation of LV, 11kV and 20kV cables.

The second certificate focuses on project management and cable jointing, recognising our expertise in the specialist tasks of connecting, terminating and maintaining power cables across the same voltage range.

Together, these accreditations demonstrate the breadth of our technical capability and our adherence to industry best practice.

For our clients, NERS accreditation provides confidence that every project is delivered with safety, precision and regulatory compliance at its core. Working with a NERS-approved contractor significantly reduces project risk, eliminates potential delays and meets the mandatory requirements of DNOs and IDNOs.

It ensures that all works - whether construction-based, civil, cable-laying or jointing - are carried out to consistent national standards using audited processes and competent personnel. At Argon Utility Infrastructure, these certifications are more than a formality; they reflect our ongoing dedication to professionalism, reliability and continuous improvement.

By choosing our team, clients gain a trusted partner capable of managing complex electrical infrastructure projects with efficiency and integrity.

Case Study: 101 Upper Road

Thu, 24 Jul 2025 14:44:48 GMT

Services: Electric

Client: TSOY Developments

Location: Kennington

We recently completed the installation of a 185mm 4-core mains cable on site to provide power to four luxury homes located in the heart of Kennington.

This project was carried out for one of our newest and most exciting clients, TSOY Developments. It’s been a pleasure supporting their vision, and we’re looking forward to collaborating on many more high-end developments in the near future.

WIRS Accreditation

Thu, 17 Jul 2025 08:39:07 GMT

WIRS Accreditation

We’re pleased to confirm that Argon Utility Infrastructure has recently been awarded WIRS (Water Industry Registration Scheme) Partial Accreditation by LRQA.

This accreditation gives us formal approval to deliver:

CMS – Construction of Mains and Services (all works)

It’s a key step in the continued growth of our water offering and allows us to tender for works under WIRS, a nationally recognised standard across the water industry. More importantly, it reflects how we already operate - with a focus on safe, consistent, and compliant delivery, regardless of the sector.

To achieve the accreditation, our systems, processes and capabilities were independently assessed against strict technical, quality and health & safety criteria. The result is added reassurance for clients that our work in the water sector meets the same high standards we apply across all our projects.

We’ve built a team with experience across the full range of utility infrastructure, and this is another milestone that allows us to offer a joined-up, accredited service across power, gas and water.

If you’d like to know more about our WIRS scope, or discuss how we can support your next project, get in touch — we’re always happy to talk.

Case Study: Charlotte Street

Thu, 26 Jun 2025 14:57:40 GMT

Services: Electric

Client: FM Construction

Location: Central London

The Charlotte Street project has been a challenging one, not only due to its central location but also because of complex ground conditions, particularly the high concentration of existing underground services. Our on-site team, Greg and Vas, have been working tirelessly to maintain a safe working environment, with public safety and satisfaction being a top priority throughout.

We are currently installing a 125mm duct from the point of connection (POC) on Windmill Street to the termination point on Charlotte Street for our client, FM Construction. This duct will house a 300mm² three-core cable, which will terminate in the basement of what will soon become a high-end hotel. The installation includes connection to a 600A combined CT metering unit, fused at 400A.

UK Power Networks (UKPN) will carry out the closing joint, which will be located within their buried substation.

Case Study: Eastern Avenue Retail Park EV Charging

Thu, 29 May 2025 13:44:57 GMT

Services: EV Charging

Client: RAW Charging

Location: Romford, East London

The Argon team was contracted by RAW Charging, a hospitality specialist providing EV charging solutions.

The end client, Home Bargains, required the installation of five EV charging stations at the Romford Retail Park. Our scope included the design and build of a complete solution tailored to Home Bargains' requirements.

Collaborating with our design house, we developed a fit-for-purpose system and secured both Network and IDNO approval for the installation of a 250 kVA transformer to support the charging infrastructure.

The Argon team carried out all civil works, ducting, cable pulling, and installation of the EV charging units. In partnership with our substation installers, we sited and installed the substation, coordinated with the Network provider to complete the non-contestable closing joint, and successfully energised the site and the charging stations.

Case Study: Greene King EV Charging

Thu, 15 May 2025 15:04:30 GMT

Services: EV Charging

Client: RAW Charging

Location: Burton-on-Trent

The Argon team was contracted by RAW Charging, a hospitality specialist providing EV charging solutions, for a project at Greene King Brewery’s Head Office in Burton-on-Trent. The scope involved installing 20 EV charging stations.

We designed and delivered a tailored solution that met the needs of Greene King’s management and staff, a key client of RAW Charging. Working with our design house, we secured Network and IDNO approval for a 1000 kVA substation to power the chargers.

Our team handled all civils, ducting, cable pulling, and unit installation. We coordinated with substation specialists and the Network to complete the non-contestable joint and energise the site.

Health and safety remained a top priority throughout. The site was kept clean and tidy, and all works were completed to a high standard, meeting the expectations of Greene King’s directors and H&S officers.

Case Study: Salisbury Crescent

Thu, 17 Apr 2025 13:34:06 GMT

Services: Gas

Client: SGN

Location: Dorset

This project involved the renewal of an existing 4” ductile iron (DI) gas main and 26 associated service connections using the dead insertion method.

A total of 135 metres of 4” DI main was safely abandoned, and in its place, we dead inserted 135 metres of 75mm polyethylene (PE) pipe. Once the new PE main was in place, all existing service connections were successfully transferred onto the upgraded 75mm PE infrastructure.

This method allowed for a cost-effective and minimally disruptive solution, while ensuring improved system integrity and long-term performance.

Case Study: Veolia Liverpool

Thu, 13 Mar 2025 14:17:12 GMT

Services: Gas

Client: Veolia

Location: Liverpool

This project involves installing a 355mm/250mm PE MP Main and service from the 500mm MP Cadent network main located 868m away from site, terminating in a bespoke kiosk with a 102m MP meter.

The carriageway excavation was completed under two-way traffic light control throughout the project to ensure safety and minimise disruption to residents.

The specialist 500mm x 300mm MP branch saddle was undertaken by Radius.

All works are to be backfilled and reinstated once the Gas Meter has been commissioned, so our client can commission his new development.

Case Study: Faith Community Church

Thu, 20 Feb 2025 14:26:43 GMT

Services: Gas & Electric

Client: Faith Community Church

Location: Bedford

This project involves installing a 63mm PE LP service from the network main located on the opposite side of the carriageway, terminating in a GC2 meter box.

Additionally, 50mm electric ducting, including a 35mm cable, will be installed across the carriageway.

The carriageway excavation will be completed in two halves under two-way traffic light control to ensure safety and minimise disruption to residents.

Case Study: Montpelier

Thu, 06 Feb 2025 15:26:21 GMT

Services: Electrical Infrastructure

Client: Livin Construction

Location: West London

For our Montpelier project, we installed a 300mm waveform cable across the road to the site boundary, reducing it down to 95mm to supply plots 1 and 2. Additionally, a 95mm run was installed on-site, extending towards plots 3 and 4. All properties were provided with 3-phase services due to their size.

The project was for the construction of four luxury homes in W5, London, with a value of £9.6m. One of the key challenges was the lack of available parking bays. Despite placing no-parking cones, they were frequently moved, and vehicles continued to park, making the installation process more difficult.

SSEN completed the Point of Connection (POC) to energise the supply, while UKPD served as the adopting Independent Distribution Network Operator (IDNO).

Case Study: Bashley Common Road

Thu, 09 Jan 2025 15:46:38 GMT

Services: Gas Infrastructure

Client: SGN

Location: New Milton, New Forest

This new project on behalf of SGN involves the replacement of 934 meters of medium-pressure (MP) steel mains. The project will utilise 75mm polyethylene (PE) pipe for insertion.

A road closure will be in effect during the works, with significant efforts having been made to maintain good relations with local residents to limit the disruption.

Stay tuned for updates throughout the project.

GIRS Accreditation

Thu, 02 Jan 2025 16:01:35 GMT

Argon Utility Infrastructure - GIRS Accreditation

Argon Utility Infrastructure is proud to hold GIRS (Gas Industry Registration Scheme) accreditation across the key categories of CNRB, CCCR, and CMOBs. Additionally, we hold Partial Specialist accreditation for Hot Welding Connections.

What This Accreditation Means for Us and Our Clients

Our range of GIRS accreditations underscores Argon Utility Infrastructure’s ability to deliver across various specialised areas:

CNRB (Construction New Roads and Buildings): Managing the installation of gas mains and services for new developments, ensuring compliance with regulations and standards.

CCCR (Construction Connections, Commissioning, and Routine Build): Handling new connections to existing gas networks, commissioning systems for safe operation, and performing routine infrastructure builds.

Construction Multi-Occupancy Buildings (CMOBs): Designing and constructing gas systems for multi-occupancy buildings, such as apartments and commercial facilities, including shared pipelines and individual metering solutions.

Specialist Hot Welding Connections: With our partial accreditation in this area, we provide expert hot welding solutions for specialised gas pipeline projects, ensuring precision, safety, and durability in critical connections.

Expertise in Gas Infrastructure

With these accreditations, we offer a full spectrum of services, including:

Planning and executing gas infrastructure for roads, buildings, and multi-occupancy facilities.
Connecting and commissioning gas networks with safety and efficiency.
Utilising advanced hot welding techniques for specialised pipeline connections, further enhancing our service offerings.

From concept to completion, our team ensures that every project is executed to the highest standards of safety, compliance, and quality.

Meeting the Demand for Advanced Gas Infrastructure

As the energy sector evolves, the demand for robust and efficient gas networks continues to rise. Our GIRS accreditations position us to meet this demand by delivering innovative solutions for both new developments and modifications to existing networks. The addition of partial accreditation in Specialist Hot Welding Connections enables us to take on even more complex and technically demanding projects.

Safety, Quality, and Professionalism at the Core

At Argon Utility Infrastructure, safety, quality, and professionalism are the foundation of our work. Whether it’s full-scale projects in new developments or specialised services like hot welding connections, we prioritise excellence in every aspect of our operations. Our GIRS accreditations are a testament to our ability to deliver high-quality results while adhering to the strictest safety standards.

The Future of Gas Utilities

With our GIRS accreditations, Argon Utility Infrastructure offers comprehensive gas infrastructure solutions tailored to the evolving needs of the industry. From supporting new developments to upgrading and maintaining existing networks, we are proud to be a trusted partner in supporting the future of the gas utilities sector across the UK.

Hiring: MU Utility Team

Thu, 12 Dec 2024 14:54:17 GMT

We are actively hiring for roles in GIRS and Network Contracts, so if you're experienced in utility work and meet the requirements, this is your opportunity to join a dynamic and growing team.

About Us

Argon Utility Infrastructure is a premier independent provider of utility services across the UK, specialising in electric, gas, water, and renewable energy infrastructure. Serving both domestic and commercial sectors, we deliver end-to-end solutions, from design through to installation. Our expertise spans high and low voltage electrical systems, gas mains and services, water installations, and renewable energy systems, making us a trusted name in the industry.

Why Join Argon?

We offer competitive salaries based on experience, along with long-term opportunities and an immediate start. Ideal candidates will hold relevant tickets and certifications listed below.

If you’re ready to lead or join a skilled MU Utility 2-man team, contact us at 01767 317689 or email info@argonutilityinfrastructure.co.uk to apply today.

Case Study: Dewsbury

Thu, 28 Nov 2024 15:26:13 GMT

Services: Gas Infrastructure

Client: J.P. Wild

Location: Churwell Vale, Dewsbury

This project required a new 90mm gas service to be installed to an existing warehouse. The necessary permit was obtained from the local council, and approval was secured from Northern Gas Networks (NGN) to proceed with the project.

During the planning phase, there was some confusion regarding the size of the parent main, which required clarification with NGN to ensure proper compliance and alignment with specifications.

Once this issue was resolved, the installation process was carried out smoothly, and the job was completed efficiently. Take a look through some of the project images below.

Case Study: Blandford Road

Thu, 21 Nov 2024 15:06:25 GMT

Services: 140m MP Mains Replacement

Client: SGN

Location: Sturminster Marshall, Dorset

Blandford Road is a project to replace 140 meters of MP mains that commenced in November 2024, starting with the setup of a road closure on the A350.

Extensive planning and community engagement were key to preparing for these works, including attending local drop-in meetings with residents and businesses to ensure everyone was informed about the work.

While the project is scheduled to take four weeks, we are optimistic about completing all tasks, including reinstatement, within three weeks.

Case Study: St Marys

Thu, 14 Nov 2024 14:21:10 GMT

Services: Electrical Infrastructure

Client: TGG Utilities

Location: Southampton

At St Marys we installed 134m of 150mm ducting, 120m of 300mm waveform, and 15m of 300mm LSOH LV cables with the project being delivered on time and on budget.

Alongside this we have also completed the civils for the installation of a new 90mm water service. This project was completed on behalf of our client TGG Utilities.

Take a look through some of our project images below, and get in touch with our friendly team if you've got an upcoming project that you'd like us to quote on.

Case Study: Brooklands Place

Thu, 07 Nov 2024 19:03:08 GMT

Services: Gas Infrastructure

Client: Livin Construction

Location: Brooklands Place

A returning client, Livin Construction, required a 63mm PE mains extension along with three service connections for newly built properties.

After coordinating and securing permissions from two different network owners, our team arrived on-site to complete the installation.

We successfully laid, tested, and commissioned the new gas mains and service connections, ensuring everything met industry standards for safety and reliability.

Case Study: Ashley Road

Thu, 31 Oct 2024 15:38:38 GMT

Services: Electrical Infrastructure

Client: Formation

Location: Tottenham, London

The Ashley Road project is a 4-6 month undertaking to install 2.7km of UKPN-spec cable ducting and high-voltage (HV) cable to support a new development by Haringey Council.

Phase 1 involves installing approximately 300 meters of ducting and cable from the northern boundary to the project site. This work will begin in residential areas, with careful planning to minimise disruption to residents. As each section is completed, the site will be restored to allow residents to reclaim parking spaces as soon as possible.

Phase 2 shifts to the southern part of the site to install the remaining 2.4km of cable along more complex sections of the TfL road network, including Monument Way and the A10 High Road. This phase presents additional challenges due to the high-traffic nature of these routes.

Case Study: Salisbury Road

Thu, 17 Oct 2024 14:55:36 GMT

Services: Mains Replacement

Client: SGN

Location: Blandford Forum, Dorset

Another new mains replacement project started this week for our client SGN, in Blandford Forum, Dorset. We’ll be working to strict timescales on this project as the local Council wish to minimise disruption to the local community.

The works include replacing leaking old 8” ST infrastructure with new PE pipe, and then relay existing services to customers properties to eliminate the many leaks that get reported regularly.

Job duration is set for completion within 4-6 weeks.

Case Study: Addington House

Thu, 10 Oct 2024 15:27:49 GMT

Services: Gas and Electrics

Client: TGG Utilities

Location: London Street, Reading

For our Addington House project we delivered electric, gas and water for 8 properties. Project details:

Set up pedestrian diversion and bus lane closure
Excavate for connection to water and gas main as well as connections to electric main
Disconnected old service
Obtained design and approvals from network
Licence submitted to local highway authority and completed planned in-house

NERS Construction - Civils Accreditation

Thu, 03 Oct 2024 13:07:34 GMT

Argon Utility Infrastructure Achieves Full NERS Construction - Civils Accreditation

We are thrilled to announce that Argon Utility Infrastructure has achieved the FULL NERS (National Electricity Registration Scheme) accreditation for Construction - Civils, allowing us to lay duct and cable up to 132 kV. This milestone is a testament to our commitment to quality, safety, and excellence in the utilities infrastructure sector.

What This Accreditation Means for Us and Our Clients

The Full NERS accreditation sets the highest standards for companies working on electricity networks. Being accredited under the Construction - Civils category means Argon Utility Infrastructure has demonstrated our capability to safely and efficiently deliver complex civil engineering tasks, including the laying of ducts and high-voltage cables up to 132 kV.

Delivering Excellence in Duct and Cable Laying

The scope of this accreditation allows us to expand our services. From excavation and trenching to the installation of underground ducts and cables, we are now equipped to handle the full range of civil engineering works associated with power distribution infrastructure. Our team has the expertise to manage everything from project planning and execution to compliance with industry regulations and standards.

Meeting the Growing Demand for Reliable Power Infrastructure

With the ability to lay cables up to 132 kV, we are prepared to contribute to the development and maintenance of critical electricity networks. Whether connecting substations, industrial facilities, or supporting new developments, our team can now provide turnkey civil solutions that meet the increasing demand for reliable and efficient power distribution.

Safety, Quality, and Professionalism at Our Core

Achieving this accreditation is not just a box-ticking exercise for Argon Utility Infrastructure; it's a reflection of our focus on delivering projects safely, efficiently, and to the highest standard. The Full NERS accreditation is a mark of our ongoing commitment to excellence in all aspects of our work. We are excited to bring this enhanced level of service to our clients and look forward to playing a key role in the development of robust, reliable electricity infrastructure across the UK.